RADIOLINK ELETRONIC LIMITED
www.radiolink.com
14
2. Press “Dec(-)” or “Inc(+)” button to select RATE for adjustment, set the most comfortable value
you want. From the graph you will clearly see the changes you have made on the EXP RATE, also move
the trigger to check the throttle status.
Adjustment method for BRK-EXP curve
Setup Items
RATE: BRK-EXP rate
Adjustment range
RATE: -100 ~ 0 ~ +100
0~-100: flat braking
0: uniform braking
0~+100: sensitive braking
Brake side adjustment (select BRK)
(1) Press“Enter”key, the current BRK value will blink, use“Inc(+)”button to adjust the + side when
you want to quicker the rise and use“Dec(-)” button to adjust the - side when you want to make the
rise milder.
(Note: In the interface of adjusting the value, return to the initial value "0" by pressing “Dec(-)” and
“Inc(+)” buttons simultaneously for about 1 second.)
(2) Press “Enter” button, the adjusted BRK value stops blinking, now the BRK value has been set.
(3) When ending setting, return to the initial screen by pressing “Exit” button twice.
4.8 Throttle Speed "THSPD"
Throttle servo delay
Sudden trigger operation on a slippery road only causes the
wheels to spin and the vehicle cannot accelerate smoothly. Setting
the throttle speed function reduces wasteful battery consumption
while at the same time permitting smooth, enjoyable operation.
Operation
Throttle servo(amp )operation is delayed so that the drive wheels
will not spin even if the throttle trigger is operated more than
necessary. This delay function is not performed when the throttle
trigger is returned and at brake operation.
OFF: Speed1 or speed2 can be selected.
OFF means shut down the throttle speed function
Adjustment method for SPEED1
Setup items
MODE: Speed type selection
ALL: Speed adjustment
