RadioLink Electronic Limited
111
If trigger ratio is set to Forward 100: Brake 0 with the trigger function in
Throttle mode
(Trigger) menu
, the brake side operation will stop to working. When using the brake mixing
function, set the trigger mode to Forward 70: Brake 30 or Forward 50: Brake 50.
Setting steps: turn on the RC8X into home page, click the button
at the left bottom of
RC8X into System menu, click
into Mixing menu, click the blue select box named Brake
mixing into the menu to set it. Click “-“ to decrease the value and click “+” to increase the
value.
Reset: click Reset will make the value back to the default number.
Back: click the button
or short press the power button to return to the previous menu.
2.6.3 Gyro mixing
This function can be used to set the built-in gyroscope of the receiver and the external
professional car gyroscope function individually. You can use the auxiliary channel switch or
button to adjust the gyroscope sensitivity.
Gyro mixing
1/2
Mixing: The button at the right of “Mixing” is OFF, and the background color of the select
box is grey, indicating that the built-in gyroscope function is turn off. The button at the right of
“Mixing” is ON, and the background color of the select box is blue, indicating that the built-in
gyroscope function is turn on.
Channel: the channel to control the built-in gyroscope, it defaults controlled by the channel
8, channel 1 to channel 8 can be selected. Before setting the gyro-controlled channel, please
check if the channel you are ready to select has occupied or not in the “Channel setting”.
