RadioLink Electronic Limited
51
Nor.+jog: If set the “Dir.” of the button is “Nor.” and the “Type” is jog, the servo value
will reach to +100 from the original value 0 when pressing the button and the servo value will to
-100 when loosen.
Rev.+jog: If set the “Dir.” of the button is “Rev.” and the “Type” is jog, the servo value
will reach -100 from the original value 0 when pressing the button and the servo value will to
+100 when loosen.
Nor.+lock: If set the “Dir.” of the button is “Nor.” and the “Type” is lock, the servo
value will reach +100 from the original value 0 when pressing the button once and the servo
value will to -100 when pressing the button again.
Rev.+lock: If set the “Dir.” of the button is “Rev.” and the “Type” is lock, the servo value
will reach -100 from the original value 0 when pressing the button once and the servo value will
to +100 when pressing the button again.
PS buttons sound setting
Click
2/2
at the top right corner to switch the setting menu to Sound setting menu.
The sound of button PS1, PS2, PS3, PS4, PS5, PSS, and PTS can be set in this menu.
Setting steps: click the blue select box named Auto (because the default factory setting is
Auto) can into the sound setting list, select one of the sound types as the prompt tone. You can
listen to it when selected, and you can hear the prompt tone every time you press the button
after the selection.
Auto: indicate the sound type of the default factory setting.
