RadioLink Electronic Limited
71
2.3.7 End point (EPA)
Use this function when performing left and right steering angle adjustments, throttle high
side/brake side operation amount adjustment, and
channel 3, 4, 5, 6, 7, 8 servo upside/down side operation
amount adjustment.
Correct the maximum steering angle of the left and
the right steering angles when there is a difference in the
turning radius due to the characteristics of the vehicle.
The left and right sides of each channel can be
adjusted independently, the default end point is 100, 0
to 120 can be selected.
Setting steps: turn on the RC8X, into home page,
click the button
at the left bottom of RC8X into
System menu, click
into Basic menu, click the blue select box named End point can into the
menu to adjust the end point for channel 1 to channel 8. Click “-“ can decrease the value, and
click “+” can increase the value.
Reset: click Reset will make the value back to the default number.
Back: click the button
or short press the power button to return to the previous menu.
