RadioLink Electronic Limited
72
2.3.8 Fail-safe
This function sets the servo operation position when transmitter signals cannot be received
by the receiver for some reason.
Setting steps: turn on the RC8X, into home page,
click the button
at the left bottom of RC8X into
System menu, click
into Basic menu, click the blue
select box named Fail-safe can into the menu to set the
fail-safe for channel 1 to channel 8. Click “-“ can
decrease the value, and click “+” can increase the
value, 0% to 100% can be selected.
The initial value is 0%, which means that when the
transmitter signals cannot be received by the receiver,
the throttle will stop to output, and the servo will keep
its position immediately before the reception was lost.
You can set the value to make the servo move to a preset position you want when the
fail-safe function is activated according to your cars or boats.
For gasoline engine cars, for safety, we recommend that this fail-safe function be used to set
the throttle channel in the direction in which the brakes are applied.
Reset: click Reset will make the value back to the default number.
Back: click the button
or short press the power button to return to the previous menu.
