background image

Radiolink Electronic Ltd

www.radiolink.com

Thank you for purchasing RadioLink 8-channel remote controller T8S.
To fully enjoy the benefits of this product and ensure safety, please read the manual carefully and set up

the device as instructed steps.
If any problems found during the operation process, either way listed below can be used as online tech
support.
1. Send mails to

after_service@radiolink.com.cn

or

after_service1@radiolink.com.cn

and we will answer your

question at the earliest.
2. PM us on our Facebook page or leave comments on our Youtube page
3. If the product is purchased from the local distributor, you can also ask them for support and repair as prefer.

All manuals and firmwares are available on RadioLink official website

www.radiolink.com

and more tutorials are

uploaded. Or follow our Facebook and Youtube homepage to stay tuned with our latest news.

SAFETY PRECAUTIONS

Never operate models during adverse weather conditions. Poor visibility can cause disorientation and loss
of control of pilots’model.

Never use this product in a crowd or illegal areas.

Always check all servos and their connections prior to each run.

Always be sure about turning off the receiver before the transmitter.

To ensure the best radio communication, please enjoy the flight/driving at the space without interference
such as high voltage cable, communication base station or launching tower.

WARNING

This product is not a toy and is

NOT

suitable for children under the age of 18. Adults should keep the product

out of the reach of children and exercise caution when operating this product in the presence of children.
Water or moisture may enter the transmitter inside through gaps in the antenna or joystick and cause model
instability, even out of control. If running in the wet weather(such as game) is inevitable, always use plastic
bags or waterproof cloth to cover the transmitter.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency

Summary of Contents for T8S






















Reviews: