Radiolink Electronic Ltd
4
Range Calibration:
Toggle both sticks (Ch1-4) to the highest point/maximum and the lowest point/minimum.
Then back to the central point. (Refer to image below)
Central Point Calibration:
When the joysticks are back to the central point, press the throttle trimmer button
(with an arrow to right and marked as No.2 in below pic). Two short DD sounds will be heard while the first
green indicator is always on, meaning the stick calibration is complete.
Chapter 2 Firmware Upgrade
T8S can be upgraded with latest functions added, keeping advanced as always.
The function of data backup makes massive copy possible, even the same model can directly copy data. Set
parameters once, copy at ease!
The
whole
file
with
all
necessary
tools
can
be
download
via
http://radiolink.com.cn/doce/Firmwares/T8S/T8Sparamsetuptools.rar
Note The latest firmware for T8S is under development and will be available very soon. The current
available one is
T8S_FHSS_V803_69da_20190725_33bit.hex. as factory default.
Below upgrade steps
are explained with the default firmware and this T8S manual and the zip file will upgrade as soon as the
latest T8S firmware comes out.
Throttle Trimmer Buttons
Elevator Trimmer Buttons
Aileron Trimmer Buttons
Rudder Trimmer Buttons
1
2
3
4
6
5
7
8
