RadioLink Electronic Limited
16
3.2.5 DELAY
Adjusts the synchronous ratio between the servos position and the actual operation. The default value
is 100 by factory setting meaning no delay.
3.2.6 AUX.CH
The CH1/2/3/4 of the T8S transmitter are 4 basic channels, and CH5/6/7/8 are auxiliary channels. The
switch of the basic channel cannot be modified. But different switches can do some auxiliary functions by
setting CH5/6/7/8, such as control the opening and closing of the bait hopper, control whether the machine
releases smoke or not etc.
Each auxiliary channel can be customized with one of three-way switch, toggle-switch or push-switch.
Any one of three-way switch, toggle-switch or push-switch can also be set to control different channels.
And the final effect can be seen on the “SERVO MENU” interface.
Note that If you flip any switch and two channels will change, please check whether the two auxiliary
channels are set to the same switch.
The interface of parameter setup APP on phone.
Click the auxiliary function of CH5/6/7/8, there will be five options of “SWA”, “SWB”, “VrA”, “VrB” and
“NULL” for selection.” NULL “means no switch control.
The interface of parameter setup software on computer.
