Titra
Lab
®
TitraLab 870 Reference Manual
Page 146
Keyboard
connection -
Important
To make sure that the TitraLab 870 Titration Workstation complies
with the requirements of the EMC Directive 89/336/EEC, the PC
keyboard connected to the instrument’s PS2/DIN socket must be fitted
with a ferrite. This ferrite is placed as close as possible to the PS2/DIN
keyboard cable plug.
All the mini keyboards supplied by Radiometer Analytical are fitted
with a ferrite. This ferrite must not be removed!
If you intend to use the TIM870 with a keyboard that is not supplied by
Radiometer Analytical, you must make sure that the ferrite is
positionned next to the PS2/DIN keyboard cable plug.
Note: the absence of the ferrite on the PC keyboard cable will not in
any way impede the correct operation of the TitraLab 870 system.
Language
Select from English, French, German, Danish, Spanish, Italian or
Swedish.
Enter in:
Setup menu > Configuration
Linear
(temperature
correction)
Refer to "Temp. correction None/Linear/Nat. water", page 246
.
Low (result
indicator)
Summary of Contents for TitraLab 870
