C-0636-020-01 0
R A D I
0 N I C
S
D636A Command
Features
Displays complete system
status in English text
l
Used with the D4112 and
D6112 Control/
Communicators
Programmable custom text
for each zone
Easy to understand backlit
LCD Display
Illuminated touchpad
Red Armed Status LED
Programmable “idle display”
text
l
Three programmable one-
touch function keys
User friendly system status
sounder
Initiate local system test
and perimeter Watch from
the keypad
Multiple arming options and
special alarm options
l
Slim-line designer styling
compliments any decor.
l
Three expansion zones
Four-wire connection to
control/communicator
the
Center Specifications Sheet
7 5 - 0 5 5 0 6 - 0 0 0 - C 6/90
Command Control
The D636A Command Center does
more than just arm and disarm the
D4112/D6112 security system.
When you use the Command Bar
with one or two other keys, the D636
gives you control over the entire
security system.
The D4112 and D6112 Control/
Communicators can be program-
med for a wide variety of command
functions executed from the D636A
Command Center.
Programmable Function
Keys
The D636A has three function keys,
and when used with the D6112, can
be programmed to perform most
system command functions (other
than arming commands) with the
touch of one key. When used with
the D4112, the function keys are
preprogrammed. Function key “A”
is Command 44 (local system test),
function key “B” is Command 47
(reset detectors), and function key
“C” is Command 5 (passcode
change).
English Language Display
The D636A display consists of 2
lines, each containing 16 characters
of English-language text. The first
line is the idle text display. This line
can be programmed to display your
company name when the Command
Center is in the idle state.
The second line displays all system
events, giving the end user instant
identification of system status. No
guesswork is involved. Program-
mable displays for each protective
zone give your company’s installa-
tions that special customized touch.
1989-1990 Radionics, Inc.
