74-07579-000-A 2/96
Page 14
© 1996 Radionics, Inc.
out'. This means it will exit the Editor Mode and return to the normal display. To
access the Editor mode again, you must present an Editor key/card to the
internal reader again.
How to Use the EK1000 Keypad and Editor Mode
When you need to make changes to
the system, present one of the five
Editor key/cards to the built-in
internal reader on the front of the
door controller.
Use the External Reader to add
alternate ID devices:
If you are
using an external reader for
alternate styles of ID device, use the
external reader in place of the
system's internal reader. If the
key/card is programmed as a valid
Editor, the screen displays "SEL?".
Using the Keypad
After accessing the Editor mode by presenting one of the Editor key/cards to the
internal reader, the display will now show "SEL?". You may now press one of the
following keys on the keypad:
PIN/1
Displays the user key/card's PIN number when you present the
key/card
KEY/4
Allows you to add or edit system users
VOID/5
Allows you to remove users from the system
DOORS/6
Allows you to edit the door information and to control access doors
TIME/7
Allows you to create and edit Time Profiles and Time Periods for
users and doors
PRINT/8
Allows you to print system reports
INST/9
Access to clock setting, add/delete Editor keys, set door channel
interlock, set anti-pass back and upload/download
Arrow keys for moving around through records
SEL/SAVE
Used when entering data or to confirm operations
ESC
Leaves the editor
Entering Data
You will need to enter different types of information into the Editor. Here are
some important points to remember.
Whenever you add or change any data item you must press
SEL/SAVE
to
confirm and accept the changes.
You can press
ESC
to leave the data unaltered.
Figure 9: The EK1000 display
