FP103230-1 REV.K
Page
8
of
12
Mounting on Pole
1.
Fasten the
assembled Mount to
a maximum 4.5" OD
mounting pipe using
pole mounts as
shown. Position so
that face of mounting
plate is parallel to
desired beam path.
2.
Align center hole of
antenna with pivot
pin, and elevation
slot with elevation
pin. Push antenna
towards mount and
engage pins. Hold in
place.
IMPORTANT:
Do
not loosen the 4
bolts securing the
upper and lower
mounting brackets
Pole Mount
Antenna
Pivot Pin
Elevation Pin
Elevation Slot
Center Hole
