3
socket on the rear of the base unit. Plug the adaptor into a
mains socket and switch on.
3)
Insert the required line cord into the socket marked LINE on
the rear of the base unit.
4)
Wall Mounting
- Fit the desk/wall bracket to the 4 slots on the underside of
the telephone, next to the battery
compartment, with “wall”
facing upwards.
- Directly beneath the hook switch push down on the latch
and pivot up.
- Drill 2 holes vertically 88mm apart on the wall where you
wish to locate the phone and insert the screws. Tighten the
screws so that the phone slots in place and fits snugly.
- Note
– take care not to drill through holes or elctrical cable.
1.
Speakerphone
2.
Large LCD Display (8.5cm x 4cm)
3.
Headset Socket (2.5mm)
4.
Desktop or wall Mountable
5.
70 Incoming Caller ID Memories
6.
70 Phone Book Memories
7.
16 Last Dialed Number Memories
8.
8 One Touch Memories and 10 Two Touch Memories
9.
16 Digit Alphanumeric display
10.
32 Digit Memory / Redial
11.
FSK/DTMF dual system compatible
12.
12 Language Options
13.
Local Area Code Setting
14.
Time, Date,Month and Day setting
15.
Recall Settings
16.
Tone / Pulse setting
17.
PABX code setting
18.
LCD contrast setting- 5 levels
19.
Mute switch
20.
Electronic Ringer Hi-Lo-off
Features
