https://harrissupplyind.com - To Order Parts Call 608-268-8080
HOW TO USE THIS MANUAL
980200 05/28/04
1-1
This manual contains the following sections:
-
HOW TO USE THIS MANUAL
-
SAFETY
-
OPERATIONS
-
MAINTENANCE
-
PARTS LIST
The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.
Parts may be ordered from authorized dealers.
When placing an order for parts, the machine model
and machine serial number are important. Refer to
the MACHINE DATA log which is filled out during the
installation of your machine. The MACHINE DATA
log is located on the inside of the front cover of this
manual.
Always ensure that the machine is provided with a
nameplate giving the
Serial Number
and
CE
marking
in the position shown. If missing, please
contact your dealer immediately.
The SAFETY section contains important information
regarding hazard or unsafe practices of the machine.
Levels of hazards is identified that could result in
product or personal injury, or severe injury resulting
in death.
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its
components in good working condition. They are
listed in this general order:
-
Batteries
-
Brushes
-
Belts
-
Service Schedule
-
Machine Troubleshooting
MODEL _____________________________________
DATE OF PURCHASE ________________________
SERIAL NUMBER ____________________________
SALES REPRESENTATIVE # ___________________
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
-
REF –
column refers to the reference
number on the parts illustration.
-
PART NO.
– column lists the part
number for the part.
-
QTY
– column lists the quantity of the
part used in that area of the machine.
-
DESCRIPTION
– column is a brief
description of the part.
-
SERIAL NO. FROM
– column indicates
the first machine the part number is
applicable to. When the machine design
has changed, this column will indicate
serial number of applicable machine.
The main illustration shows the most
current design of the machine. The
boxed illustrations show older designs. If
column has an asterisk (*), call
manufacturer for serial number.
Data
Plate
-
NOTES
– column for information not
noted by the other columns.
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.
NOTE: The 98# on the lower left corner of the front
cover is the part number for this manual.
