https://harrissupplyind.com - To Order Parts Call 608-268-8080
OPERATIONS
980200 05/28/04
3-1
UNPACKING THE MACHINE
Unpack the machine with the utmost care; avoid
carrying out any operation that could damage your
unit.
Once it has been unpacked, check for damage of
any visible component. If you notice damage, DO
NOT operate your machine and contact your dealer
immediately.
For packaging and transport purposes, some parts
and accessories are supplied disconnected from the
machine. To assemble them, carefully follow the
instructions given in following sections.
Contents of package:
•
Machine
•
Side Brush
•
Manual
•
Ignition keys (set of 2)
•
Declaration of Conformity
•
Warranty Registration
NOTE:
In the case one of the above mentioned
items is missing, please inform your dealer
immediately for replacement.
NOTE:
For security reasons during the transport, the
ignition keys are attached to the handle.
Take care to keep packaging materials (bags,
cartons, pallets, hooks, etc) out of reach of
children.
PREPARING THE MACHINE FOR OPERTION
Mounting the Side Brush:
1. Switch the brush lift lever to
OFF
.
2. Remove the screw from the side brush drive
shaft.
3. Fit the brush on the shaft.
4. Screw on the screw and washer.
Mounting the Handlebar:
1. Loosen the handlebar fixing screws.
2. Put the handlebar in most comfortable work
position.
3. Tighten the handlebar fixing screws.
Fixing
Screws
Position 1
Position 2
Mounting the Bonnet:
Prepare the battery motor before proceeding to the
assembly of the cover. Once you have done this:
1. Loosen the bonnet fixing handwheels.
2. Position the bonnet on machine.
3. Tighten the handwheels.
PREPARING THE BATTERY
The battery must be prepared before it is mounted
on the machine. This simple precaution will prevent
the machine from being damaged by the electrolytic
liquid of the battery.
!
CAUTION
Always prepare the battery in a sufficiently ventilated
environment. DO NOT smoke or use flame during
this operation.
!
WARNING
To prepare the battery:
1. Remove the caps from the battery cells.
2. Fill with Distilled water.
3. Plug the battery into the on-board charger of
machine.
Wait for the charge indicator light to be GREEN. This
indicates a full charge.