background image

GENERAL

DO NOT use solvents when cleaning plastic parts. Plastics are susceptible to damage 

from various types of commercial solvents and may be damaged by their use. Use a 

clean cloth to remove dirt, dust, oil, grease etc.

WARNING

come into contact with plastic parts. They contain chemicals that can damage, weaken 

or destroy plastic.

WARNING

When cleaning the tool with compressed air, always wear safety goggles. Flying debris 

can cause serious eye damage. DO NOT abuse power tools. Abusive practices can  

damage the tool and the workpiece.

WARNING

DO NOT attempt to modify tools or create accessories. Any such alteration or  

 

serious injury. It will also void the warranty.

Lithium-ion batteries do not have a “memory” and do not require to be completely  

discharged periodically. It is recommended that you charge your Lithium-ion batteries 

after each use so they will be fully charged when needed. 
NOTE: A fully charged battery will lose about 2% of its charge per month during storage.

PREPARATION FOR RECYCLING

To preserve our natural resources, please recycle or dispose of this tool properly.
The battery supplied with this tool may contain chemicals and metals that are harmful 

to the environment. Never dispose of rechargeable batteries in your normal household 

Consult your local waste authority for information regarding available recycling and 

disposal options.

WARNING

Upon removal of the battery pack, cover the terminals of the battery pack with electrical 

tape or heavy-duty adhesive tape. Never touch both terminals with metal objects or 

body parts, because a short circuit may result. Keep away from children. Do not attempt 

to destroy or disassemble battery packs or remove any of its components. Rechargeable 

batteries must be recycled or disposed of properly. Failure to comply with these  

9

Summary of Contents for 1248-202













Reviews: