RADLEY 1262-300, Owner'S Manual

5

1

/

4

 Sheet Sander - Owner's Manual

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a 

power tool. Do not use a power tool while you are tired or under the influence 

of drugs, alcohol or medication. 

A moment of inattention while operating 

power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. 

Protective 

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before 

connecting to power source and/or battery pack, picking up or carrying the 

tool. 

Carrying power tools with your finger on the switch or energizing power 

tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. 

A 

wrench or a key left attached to a rotating part of the power tool may result in 

personal injury.

Do not overreach. Keep proper footing and balance at all times. 

This enables 

better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, 

clothing and gloves away from moving parts. 

Loose clothes, jewellery or long 

hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection 

facilities, ensure these are connected and properly used.

 Use of dust 

collection can reduce dust-related hazards.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application. 

The correct power tool will do the job better and safer at the rate for which it 

was designed.

Do not use the power tool if the switch does not turn it on and off. 

Any 

power tool that cannot be controlled with the switch is dangerous and must 

be repaired.

Disconnect the plug from the power source and/or the battery pack from 

the power tool before making any adjustments, changing accessories, or 

storing power tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.