RADLEY 1262-300, Owner'S Manual

7

1

/

4

 Sheet Sander - Owner's Manual

         SPECIFIC SAFETY RULES

WARNING:

 Know your 

1

/

4 

sheet sander. Do not plug in the sander until you 

    have read and understand this Instruction Manual. Learn the tool’s    

    applications and limitations, as well as the specific potential hazards related 

    to this tool. Following this rule will reduce the risk of electric shock, fire, or 

    serious injury.

Always wear eye protection. Any power tool can 

throw foreign objects into your eyes and cause 

permanent eye damage. ALWAYS wear safety 

goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday 

glasses have only impact resistant lenses. They ARE NOT safety glasses.

WARNING:

 Glasses or goggles not in compliance with ANSI Z87.1 could cause 

serious injury when they break.

WARNING:

 Always use a dust mask when sanding.

WARNING:

 Always use hearing protection when sanding, particularly during 

extended periods of operation.

WARNING:

 Always unplug the tool from the power source before changing 

the sandpaper and when cleaning the tool.

Do not wear gloves, neckties or loose clothing.

Secure the workpiece. Use clamps or a vise to hold the work when practical. It 

is safer than using your hand and it frees both hands to operate the tool.

Do not sand material too small to be securely held.

Make sure there are no nails or foreign objects in the part of the workpiece to 

be sanded.

Always keep hands out of the path of the sanding pad. Avoid awkward hand 

positions where a sudden slip could cause your hand to move into the path of 

the sanding pad.

To avoid injury from accidental starting, always remove the plug from the 

power source before installing or removing sandpaper or the vacuum adaptor.

WEAR CSA 

APPROVED

EYE PROTECTION