WARNING
When servicing, use only identical replacement parts. The use of any other part
may create a hazard or cause product damage.
from various types of commercial solvents and may be damaged by their use.
Use a clean cloth to remove dirt, dust, oil, grease etc.
WARNING
to come into contact with plastic parts. They contain chemicals that can damage,
weaken or destroy plastic.
WARNING
-
cation is misuse and could result in a hazardous condition leading to possible serious
injury. It will also void the warranty.
It has been found that electric tools are subjected to accelerated wear and possible
spackling compounds or plaster. The chips and grindings from these materials are highly
abrasive to electric tool parts such as bearings, brushes, commutators, etc.
Consequently, it is not recommended that this tool be used for extended work on any
materials it is extremely important that the tool is cleaned frequently by blowing it out
with an air jet.
WARNING
Always wear safety goggles or safety glasses with side shields during all cutting oper-
ations. It is critical that you also wear safety goggles or safety glasses with side shields
take these safety precautions could result in permanent eye or lung damage.
9
Hex
key
Blade
holder
Motor
vent
Motor
vent
Pivoting
shoe
Variable speed
trigger switch
Cutting
blade
