MAINTENANCE
WARNING:
Always switch the product off, remove the battery packs and
the safety key and let the product cool down before performing inspec-
tion, maintenance and cleaning work!
WARNING:
Wear safety gloves when working on the blade and close to
it! Use proper tools to remove debris, e.g. a wooden stick! Never use
your bare hands!
Always use original spare parts for replacement. Do not attach any other
type of cutting blade! The replacement of the cutting blade should be
done by a qualified specialist!
WARNING:
Only perform repairs and maintenance work according to
these instructions! All further works must be performed by a qualified
specialist!
NOTE:
Do not use chemical, alkaline, abrasive or other aggressive detergents or
disinfectants to clean this product as they might be harmful to its surfaces.
23
40V Max* Lawn Mower
Owner's Manual
GENERAL CLEANING
UNDERBODY AND CUTTING BLADE
Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
Remove stubborn dust with high pressure air (max. 40 PSI).
1.
2.
Keep the underbody and cutting blade clean and free of debris. Remove
clippings from the rear discharge chute.
Check all fasteners, such as nuts and bolts, periodically for tightness before
operation. After prolonged use, especially in sandy soil conditions, the
cutting blade will become worn and lose some of the original shape. The
cutting efficiency will be reduced and the cutting blade should be replaced.
1.
2.
Check for any damage and wear. Repair damages in accordance with this
instruction manual or take it to an authorised service centre before using the
product again.
3.
Keep the product clean. Remove debris from it after each use and before
storage.
Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
Inspect the product before each use for worn and damaged parts. Do not
operate it if you find broken and worn parts.
1.
2.
3.
