Rado A100, Instruction Manual

14

2.7 Setting the operational times of the hydraulic functions

This sec  on of the screen enables the se   ngs of the   mes necessary for individual hydraulic func  ons of the 
drill. The   mes can be set within a range of 1 to 100 seconds according to your need.
Every drill has a di

ff

 erent 

fl

 ow rate and oil pressure (hydraulic circuit power output), therefore the   mes of 

individual movements may signi

fi

 cantly di

ff

 er.

In overall, it is possible to set six di

ff

 erent hydraulic func  ons:

2.7.1 Drill folding

Press the key, set the required value in the se   ng dialogue and con

fi

 rm it by pressing 

the 

OK

 key. The new value will be automa  cally stored in the memory.

2.7.2 Drill unfolding

Press the key, set the required value in the se   ng dialogue and con

fi

 rm it by pressing 

the 

OK

 key. The new value will be automa  cally stored in the memory.

2.7.3 Drill raising

Press the key, set the required value in the se   ng dialogue and con

fi

 rm it by pressing 

the 

OK

 key. The new value will be automa  cally stored in the memory.

2.7.4 Drill lowering

Press the key, set the required value in the se   ng dialogue and con

fi

 rm it by pressing 

the 

OK

 key. The new value will be automa  cally stored in the memory.

2.7.5 Markers raising

Press the key, set the required value in the se   ng dialogue and con

fi

 rm it by pressing 

the 

OK

 key. The new value will be automa  cally stored in the memory.

2.7.6 Markers lowering

Press the key, set the required value in the se   ng dialogue and con

fi

 rm it by pressing 

the 

OK

 key. The new value will be automa  cally stored in the memory.