22
QUARTZ WATCHES
WITH DATE DISPLAY AND MOON PHASE
CALIBER: 084
THE CROWN HAS 3 POSITIONS
1. Normal position
When pressed in against the case
(position 1), the crown ensures that the
watch is water-resistant (if not damaged).
2. Set the date and moon phase
To set the moon phase, pull the crown out to
position 2 and turn it backwards until the full
moon appears in the centre of the moon
phase dial. Use a calendar that lists the
moon’s phases to find out the date of the
last full moon. Turn the crown backwards
again until the moon is in the position
indicated on the calendar. Turn the crown
forwards until the desired date is displayed.
Press the crown back into position 1.
3. To set the time
Pull the crown out to position 3 and turn
it forwards or backwards to set the desired
time. If the watch is equipped with
a seconds hand, accept by pushing the
crown back to position 1 to coincide with a
given time signal.
QUARTZ WATCHES
WITH DAY/DATE DISPLAY
CALIBER: 114
THE CROWN HAS 3 POSITIONS
1. Normal position
When pressed in against the case
(position 1), the crown ensures that the
watch is water-resistant (if not damaged).