1. Setting the digital time
display: hours, minutes,
seconds
Select Function 1 (digital time dis-
play)
a)
Hours and minutes:
Pull the crown out. The hours and
minutes display flashes. Set the
hours by turning the crown
quickly, the minutes by turning it
slowly. Push the crown back to
normal position.
Digital and analogue time displays
are set simultaneously.
b)
Seconds in the digital display:
Pull the crown out: the hours and
minutes display flashes.
Push the crown in again: the sec-
onds display flashes for one mi-
nute. In synchronisation with a
radio or telephone time signal,
press the crown briefly during this
minute to set the seconds to zero.
Check that the minute setting is
still correct. If not, set one minute
back or forward.
24-hour display / A.M.-P.M. dis-
play: see Function 5 (T2).
1.1 Synchronisation of analogue
and digital displays
If analogue display diverges from
digital display.
NB:
The digital time must be set to
the 24-hour display (see Func-
tion 5: T2).
Select Function 8 (without digital
display). Pull out crown and turn
until both time displays are the
same. Turn crown quickly to move
the hour hand, slowly for the mi-
nute hand. Push the crown back
in.
2. Setting the date
Select Function 2 (seconds and
date display).
Pull out the crown: seconds display
disappears. The number of the
month appears next to the date.
Both numbers flash.
