background image

 

 

Manual 

 Wifi module 

for  a  software  update  can  be  deactivated  via  the  following 
command: your-module-IP/?autoupdate=0 

If  you  use  the  server  based  WLAN  configuration  page  (gear 
icon), the current module settings are transmitted to a script 
of the Bayernluft server for generating a comfortable settings 
page. A storage of this data does not take place. The privacy 
policy  of  our  homepage  applies,  which  you  can  view  at 
www.bayernluft.de/datenschutz. Please note that the module 
does not have its own SSL encryption certificate. We therefore 
recommend that you choose  the  device  name in such a way 
that no conclusions can be drawn about your identity. If you 
use  the  automatic  atomic  time  synchronization,  the  module 
retrieves  the  time  at  one  of  the  following  addresses: 
ptbtime1.ptb.de,  ptbtime2.ptb.de  or  ptbtime3.ptb.de  The 
data  protection  conditions  of  the  Physikalisch-Technische 
Bundesanstalt (PTB) www.ptb.de apply. 

 4

 

Static charge

 

The module is not overly sensitive to static charging. 
Nevertheless, we recommend that you discharge any charge 
on your body by touching a grounded object, e.g. water tap, 
radiator or similar, before unpacking the plug-on module. 

 

Summary of Contents for 58-202














Reviews: