MAINTENANCE
OM 0467QH-A
[28]
IMPORTANT:
Perform all the maintenance section without taking into account the hours given in the following cases:
1.
At least once a year if the subframe and drive kit are used less than 20 hours annually.
2.
Before each storage period.
3.
After each wash.
MAINTENANCE
SCHEDULE
D
ESCRIPTION
D
ESCRIPTION
D
ESCRIPTION
Hardware
After the first 8 hours
of operation
•
Tightens all bolts and nuts according to the Torque
Specification Table.
40 hours of operation
Connection points
Before each
equipment connection
•
Visual inspection of the clutch shaft, hydraulic connectors and
the hitch connection points. Clean if necessary.
Driveline telescopic
joint
Before the fist use
•
Grease the telescopic joint.
•
Use a grease
grade N.L.G.I. # 2
with a good thermal and
mechanical
stability that can be used in temperatures
ranging from -50°C to 150°C (-58°Fto 302°F)
•
Number of pumping cycles: 5
40 hours of operation
Driveline journal
crosses
Before first use
•
Grease the journal crosses.
•
Use a lithium soap grease E.P. compatible
grade N.L.G.I.
# 2 and
containing
no more than 1% of molybdenum
disulfide.
•
Number of pumping cycles: 8-10
40 hours of operation
Pivot bushings of the
hitch
Twice a year
•
Grease the pivot bushings.
•
Use a grease designated "Extreme Pressure" containing
molybdenum
disulfide.
This grease should specify "Moly
EP" on the label.
•
Number of pumping cycles: 3-4
Flange bearings
Before first use
•
Grease the flange bearings.
•
Use a lithium soap grease E.P. compatible
grade N.L.G.I.
# 2 and
containing
no more than 1% of molybdenum
disulfide.
•
Number of pumping cycles: 3-4
20 hours
of operation
Cylinder pins
Twice a year
•
Clean and grease the pins and bushings.
•
Use a grease designated "Extreme Pressure" containing
molybdenum disulfide.
This grease should specify "Moly
EP" on the label.
Hydraulic, electric and
connection systems
After the first
8 hours
•
Visual inspection to detect hydraulic leaks. Tighten, repair or
replace if necessary.
40 hours
of operation
Summary of Contents for LS Tractor LW3150
