Navigation
•
Configuring the Camera Connection
on page 100
•
Setting up the Monitor Display Modes
Configuring the Camera Connection
About this task
You configure the connection depending on the type of camera and its functionality. This includes
configuring the Scopia XT Camera Switch. You can do this procedure from the endpoint itself or from the
XT Series web interface.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the Scopia XT Series Locally from the Endpoint
on page 73.
Connect the video equipment, as described in
Connecting the Video Equipment to the Scopia XT Series
on page 47.
Procedure
1. Access the camera settings as follows:
• From the endpoint's main menu, select
Configure > Advanced > I/O connections >
Cameras > General
.
• From the XT Series web interface, select
Administrator settings > I/O connections >
Cameras > General
.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 100
