Important:
We recommend changing the default credentials after logging in for the first time, as
described in the
Administrator Guide for Scopia XT Series
.
3. (Optional) Select the web interface language from the
Language
list.
4. Select
Login
.
Enabling Remote Management on the Scopia XT Series
About this task
Remote management on your Scopia XT Series is enabled by default. You can configure the Scopia XT
Series so that it can be remotely managed from any computer in the network, or from a specific
computer only. You can do this procedure from the endpoint itself or from the XT Series web interface.
To remotely upgrade the Scopia XT Series, you must also enable remote downloads, as described in
Configuring Remote Upgrade Settings
We strongly recommend that you change the default credentials first time you access the Scopia XT
Series remotely, described as part of the procedure below.
See
Administrator Guide for the Scopia XT Series
for information on maintenance tasks to configure and
manage your Scopia XT Series.
Before you begin
To configure the network, contact your network administrator.
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the Scopia XT Series Locally from the Endpoint
on page 73.
To modify the PIN, you must be connected via HTTPS (see below).
Procedure
1. Access the remote management settings, as follows:
• From the XT Series web interface, select
Administrator Settings
>
Utilities
>
Remote
Access
>
Web
.
• From the endpoint's main menu, select
Configure
>
Advanced
>
Utilities
>
Remote
Access
>
Web
from the Main menu.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 63
