Important:
The code and icon do not appear when the default code,
01
, is used.
6. Set the code and exit by doing one of the following:
• In the web interface, select
Finish
.
• In the endpoint, press
OK
.
Maintaining the Scopia XT Series Locally from the Endpoint
About this task
To perform advanced configuration and maintain the Scopia XT Series from the endpoint itself, you must
first perform this procedure to access advanced settings. For example, you can enable AT commands to
manage the endpoint (as described in
Administrator Guide for Scopia XT Series
).
You can also perform advanced configuration from the web interface. See
on page 61 for details.
Before you begin
Ensure that you have the password to access the
Advanced
settings. The default password is
1234
.
Procedure
1. From the endpoint's main menu, select
Configure
>
General
.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 73