Feature
Option/Reference
Description
Network
55111-00916 Scopia XT
Series 2nd GLAN Port
This option is already included for the XT5000
and is available for the XT5000 720.
Enables 10/100/1000 GLAN port.
Recording
Videoconferences
55111-00933 USB
Recording License
This option is already included for the XT5000
and is available for the XT5000 720.
You can record videoconferences and store
them to a connected USB storage device.
You cannot record videoconferences when
encryption is enabled. For more information,
see
Enabling Encryption for Videoconferences
on page 149 or contact your administrator.
When recording a videoconference on a
system with an embedded MCU, you can
include up to 6 remote endpoints. The Scopia
XT Series SMB Edition edition can include up
to 5 remote endpoints.
This procedure details how to register your extended license purchase, to convert your new user code
and option key into an updated license key.
Procedure
1. Open the envelope that you obtained when you bought your license extension, or refer to the
email you received after purchasing the license.
2. Locate the option key in the letter. Locate the serial number on the XT Codec Unit or the user
code you received with the purchase.
You can also retrieve the user code and serial number by selecting
Configure > About
from
the Main menu.
3. From your computer's Internet browser, navigate to http://licensing.radvision.com/.
4. Complete the online registration form and enter the serial number or the user code and the
option key. The Web registration form returns a license key.
5. Write down the license key and keep it in a safe place for future use.
6. Use the license key to enable the software or the option you bought, as described in:
•
Remotely Enabling the License from the Web Interface
on page 78
•
Enabling the License from the Scopia XT Series Endpoint
on page 80
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 78
