Configuring the Screen Saver to Start Automatically
About this task
The screen saver helps to protect your monitor from burn-in without switching it off. This can be useful in
situations when you stop using your Scopia XT Series for a relatively short period of time. You can do
this procedure from the endpoint itself or from the XT Series web interface.
Procedure
1. Access the screen saver settings as follows:
• From the endpoint's main menu, select
Configure > General
.
• From the XT Series web interface, select the
Basic Settings
tab.
Figure 63: Configuring screen saver settings
2. Select
Yes
from the
Screen Saver
list.
3. Set the time after which the screen saver automatically starts on the display in the
Minutes
field.
4. From the web interface only, select
Save
.
Configuring Video Connections
There are a number of settings which affect the way the camera accepts input and the way the monitors
display video.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 99
