- 60 -
An exemplary report:
The report may be reprinted upon pressing
button. In order to finish, press
button. The
software returns to the main window of the mode and a next measurement can be performed. The
balance operates with previously set parameter values (liquid, temperature) thus shortening time
needed for the exact measurement.
11.10. STATISTICS
Statistics is a working mode allowing to acquire data from series of measurements and to produce
statistics using the acquired data. Settings of this function determine which data is displayed.
F Shortcut Keys
You can declare which particular weighing function is to be launched using F1, F2, F3 or F4 keys.
For procedure informing you how to declare the particular function, read
F Shortcut Keys
section.
Info field provides the following information:
•
N (number of samples),
•
Sum (total weight of samples within a series)
•
AVG (average value of the series)
•
Min (minimum value in a series)
•
Max (maximum values in a series)
•
DIF (difference between MAX and MIN within the series)
•
SDV (standard deviation)
•
RDV (variance coefficient)
11.10.1. Means of Operation
•
Enter <STATISTICS> mode.
•
Place the first load on the weighing pan.
•
When the indication is stable, confirm the measurement by pressing
button, the
measurement is saved in the balance memory, next it is automatically printed out with the
measurement number.
•
Remove the load from the weighing pan
•
Carry out measurements for other loads within this series
Summary of Contents for AS R2.PLUS
Page 6: ...6 1 GENERAL INFORMATION 1 1 DIMENSIONS AS PLUS series PS 200 2000 PS 1000 PS 2100 PS 10100...
Page 97: ...97...
Page 98: ...98...
