- 20 -
Fig. 9-1. Password protection – menu content
-
Administrator
the field for inserting administrator’s password. Balance administrator has access to
all balance functions and settings.
-
User
the field for inserting user’s password. Balance user has access to the
functions
and settings which attribute is set to NO (i.e. no password protection).
-
Startup
if the option is set to YES, then on balance startup the software requires entering a
password (of the administrator or user).
-
Functions
if the option is set to NO (i.e. no password protection), balance user can use all
working modes implemented in the balance software.
-
Settings
if the option is set to NO (i.e. no password protection), balance user can change
balance settings.
-
Cal + GLP only
if the option is set to YES, then balance user has access only to carrying out balance
adjustment /calibration and generating a report from adjustment process.
-
Asterisk
if the option is set to YES , then on balance startup the entered password is
previewed in a form of asterisks.
Inserting Administrator’s password
Enter a password for the balance administrator (a sequence of 6 digits) and for the
user. Balance administrator has full access to balance menu. The user access is
limited to the one described in previous point (balance menu, startup, adjustment, etc.
options can be attributed YES/NO).
It is very important to remember the password, as if option “password on startup” is
enabled (set to YES), then on the following plugging the balance to mains, the
software will request for entering the password. If it is entered incorrectly, then balance
operating will be blocked.
While entering the password use balance keys presented on Fig. 2 or use external
keyboard PS/2 type connectable to balance’s socket.
Set availability to other balance settings and functions, depending on access level
required by the balance user.
