- 65 -
Means of preparing mixtures without entering data to balance memory on formation
ingredients and their mass
If a user needs a documentation from a formula making process, e.g. in a form of a
printout, then set parameter 02 Automatic printout to 1 : YES.
In such case each accepted mass of an ingredient (by pressing F key) is automatically
printed on a connected printer or computer.
•
Set parameter 01 Prompts (Hints) to 0 : NO.
•
Enter Formulation mode by pressing ENTER key
•
Tare mass of a vessel for formula making process
•
Pour an ingredient no. 1 to the vessel until reaching desired target value (follow
criteria on prepared formulation).
•
Press F key. Mass of the first ingredient is saved in balance memory. The
parameters visible on the display will change to: IC=1, SUM=. . .
•
Mass indication on the display will zero.Press F key.
•
Repeat the process for all the ingredients set in a formulation
•
After weighing the last ingredient of a prepared formulation press
→
0/T
←
key.
The formula making process is completed. The indication with total sum of
prepared formulation is locked on the display.
•
Press PRINT key to print (send) a report from a completed formulation to a
connected printer of computer.
Statistical calculations
Statistical calculations are carried out only on total mass of prepared formulation (mass of
each ingredient in a formulation is not included in the statistics
).
If a user wants to run
statistics if the formula making mode, then:
1. Go to parameter 06 Statistics
2. Erase results of previous statistical calculations
3. Set parameter 06 Statistics to YES
4. Enter the formula making mode
5. Carry out required series of measurements
6. Once again go to parameter 06 Statistics
7. Enter parameter 06 02 Results
8. In order to print statistics press PRINT key
