- 86 -
Info field provides the following information:
•
Net
•
Gross
•
Tare
•
Threshold
•
Product
•
User
•
Keys: parameters, adjustment, print header, print footer, product, user, delete, databases.
21.1. SUPPLEMENTARY SETTINGS FOR PEAK HOLD MODE
The supplementary settings enable adjusting the working mode to your needs and requirements.
THRESHOLD
– function determining start point for peak hold control performed by the balance
software. Remember to set this threshold prior to the measuring process.
For means of operation of these functions read point 8.10 „WEIGHING mode settings”.
21.2. PEAK HOLD – QUICK ACCESS KEYS
Each working mode features automatically displayed set of default keys. The set can be modified by
assigning out-of-list quick access keys to on-screen keys. Such operation requires particular
permissions level.
Read section 7.6.1 for list of quick access keys.
21.3. MEANS OF OPERATION
•
Enter <PEAK HOLD> mode
Once you select the mode, the function is active. In order to provide proper operation, set the
threshold in grams determining point beyond which the function starts to register maximum
force apllied.
•
From now on the balance registers and holds every single weighment which is above the
threshold, and which is higher than the result of the previous peak hold. If the software detects
mass above the threshold, the highest detected indication is held on the main display and the
pictogram <Max> is shown on the right over the measuring unit.
Summary of Contents for AS X2 Series
Page 7: ...7 1 GENERAL INFORMATION 1 1 DIMENSIONS AS X2 series PS X2 series...
Page 8: ...8 APP X2 series WLC X2 series...
Page 96: ...96 Status Completed Signature...
Page 132: ...132...
