- 18 -
8.2.
Return to weighing mode
CAUTION
Changes introduced in balance memory will be saved on return to
weighing with procedure of saving changes.
Press
ESC/TARE
key for several times, until the display shows
command
SAvE?.
When display indicates the above command for saving changes, press one
of below options:
PRINT/ENTER – save changes
or ESC/TARE – abandon introduced changes, and leave to
balance menu.
After pressing an appropriate key, balance goes back to weighing
mode
.
9.
WEIGHING
Before start of weighing process or in case of essential change of ambient
conditions at a workstation (e.g. ambient temperature change at a workstation more
than 3
o
C) the balance requires adjusting. The procedure of balance adjustment is
described further in this user manual.
•
Before start of weighing procedure, it is recommended to load the balance’s
weighing pan a few times with mass close to balance max capacity,
•
Check if unloaded balance indicates “precise zero” -
and whether
measurement is stable -
, if not press
ESC/TARE
key;
•
Press
Units
key to set a measuring unit:
[g], [kg], [ct], and also if enabled in factory menu [lb], [oz], [ozt], [dwt], [t],
[mom], [gn],
•
place weighed object on balance’s weighing pan and read result only on
stabilization of measurement result,
Summary of Contents for BALANCES APP/2C SERIES
Page 2: ...2 NOVEMBER 2012...
Page 22: ...22...
Page 70: ...70...
Page 71: ...71 Return to weighing mode...
