- 8 -
4.
UNPACKING, ASSEMBLING AND STARTUP
4.1.
Assembling and place of use
•
Balance should be stored and used in locations free of vibrations and
shakes, free of air movement and dust,
Ambient air temperature should not exceed the range of: +10
o
C
÷
+40
o
C,
•
Ambient relative humidity should not exceed 80%,
•
During balance operation, ambient temperature in the weighing room should
not change more than 3°C within one hour,
•
The balance should be located on a stable wall console desk or a stable
working table which is not affected by vibrations and distant from heat
sources,
•
Take special safety measures when weighing magnetic objects, as part of
the balance is a strong magnet. Should such loads be weighed, use under
hook weighing option, which removes the weighed load from area influenced
by the balance’s magnet. For assembling the hook for under hook weighing
option see the bottom section of balance’s housing,
•
In order to avoid influence of static electricity on the measurement process,
ground the balance’s housing. the grounding bolt is located at the back of
balance’s housing.
4.2.
Unpacking
Cut protective tape. Carefully remove the balance from its packaging. Remove
any accessories from their packaging needed to correct balance operation.
Summary of Contents for BALANCES APP/2C SERIES
Page 2: ...2 NOVEMBER 2012...
Page 22: ...22...
Page 70: ...70...
Page 71: ...71 Return to weighing mode...
