3
SAFETY MEASURES AND PRECAUTIONS
Before you start installing, using or maintaining the device, you are obligated
to get familiar with this operating manual and follow its guidelines.
Before use, please read this Operating Manual carefully and use
the device as per its intended use.
Put loads in the central part of the weighing pan.
Load the weighing pan with goods whose gross mass is lower than the
maximum loading capacity of the scale.
Do not leave large loads on the weighing pan for a long time.
Secure the device against excessive temperature fluctuations, solar
radiation and UV radiation, substances that cause chemical reactions.
The device must not be used in explosive atmospheres (gas or dust).
Do not use sharp tools (e.g. knife, screwdriver, etc.) to use the touch
panel.
In case of failures, unplug the device immediately.
The device that is to be withdrawn from service must be disposed of in
accordance with applicable rules of law.
If the device is to operate in the bothersome electrostatic environment
(e.g. printing house, packhouse, etc.), an earthing cable must be
connected. To do so, use a functional earthing terminal in the device,
marked as
.
Wi-Fi
®
is a registered trademark owned by Wi-Fi Alliance. This trademark
has been used is this document for reference only and is not intended to
mark compliance of any products with products certified by Wi-Fi Alliance.
