3
PRECAUTIONS
Prior installing, using or maintaining the frame it is necessary to read
ITKU-101-02-12-18-EN user manual. Use the device only as intended.
The above user manual must be at a reach of the operator's hand in the course
of device operation.
Symbol marking sections that are extremely important for protection
against explosion.
The device must be applied in accordance with the intended use only.
Prior installation of the frame and start, it is necessary to analyse
whether the device complies with the usage requirements regarding
particular hazardous area.
In case of any sign of damage, it is necessary to stop using the device
immediately. The damaged component must be replaced or repaired
by RADWAG service immediately.
While installing the device, it is necessary to follow strictly this service
manual requirements. Not adhering to the requirements results with
loss of explosion safety.
The frame may be used as a component of device/set intended
for operation in hazardous area. Manufacturer of such device/set
is obliged to carry out analysis of the complete device/set in order
to confirm compliance with standards.
The frame must be connected to the same equalizing circuit as the
scale.
Do not apply protection shields.
Technical condition of the frame must be tested and inspected by
trained personnel, in accordance with this user manual, at least once
every three months, and in accordance with this user manual.
