13
6.7. Inputs / Outputs
Standard PUE HY10 indicator is equipped with 4 optoisolated inputs and 4
semiconductor outputs (semiconductor relays). Signals are sent via M12 8P
connectors.
4OUTPUTS
Pin1
– OUT1
Pin2
– OUT2
Pin3
– WY3
Pin4
– OUT4
Pin5
– COM
Pin6
– 24VDC
Pin7
– GND
Pin8
– NC
4INPUTS
Pin1
– IN1
Pin2
– IN2
Pin3
– IN3
Pin4
– IN4
Pin5
– COM
Pin6
– 24VDC
Pin7
– GND
Pin8
– NC
The module has been designed to expand indicator's functionality by additional
12 inputs and 12 outputs. It is equipped with optoisolated inputs and
semiconductor outputs and enables free configuration of both the inputs and
outputs (using indicator menu). For 12IN/12OUT module, the indicator's
housing cover features two cable glands through which 3-meter long leads,
terminated with strip wires, are fed.
6.7.1. Technical Specifications
Output parameters
Output quantity
4
Output type
Solid-state relay
Cable cross-section
0.14 - 0.5mm
2
Maximum output current
0.5A DC
Maximum output voltage
30VDC, AC
Input parameters
Input quantity
4
Input type
Optoisolated
Cable cross-section
0.14
– 0.5mm
2
Voltage range
5 - 24 VDC
