16
7.1.2. Platform Scales: HX7.4.xx.C, HX7.4.xx.H, HX7.4.xx.H/Z Series
Take the device out of the packaging (pallet).
Place the device on a flat and even surface. Keep it far away from any
sources of heat.
Remove transport locks (if installed):
Fix the feet (if not installed):
7.1.3. Ramp Scales: HX7.4N Series
Take the device out of the packaging (pallet).
Prior to installation, mount a steel bracket (2) onto a foot base (1), do it
using an expanding ring (3), next screw the foot base (1) onto a foot pin
(4).
Place the scale on an even surface, install ramps onto the steel brackets.
Remove ramps, looking through bracket holes, mark spots where
openings for anchor bolts are to be made.
Drill openings, mount steel brackets to the ground.
