17
7.1.4. Track Scales: HX7.2K Series
Track scale is comprised of a load-bearing structure and load cells (measuring
components). It is installed on a rail of the load-bearing structure of the
suspended track, and the load cell is installed in a particular section of the
track.
The scale must be installed by an authorized RADWAG
service exclusively, otherwise the warranty gets null and
void. During scale installation attention must be paid to
stresses and the weighing system, i.e. the weighing system
must lack the stresses.
7.2. Levelling: 1-Load-Cell Platform Scales
It is necessary to level the scale, do it by turning its feet. Keep turning the feet
until the air bubble takes central position.
7.3. Levelling: 4-Load-Cell Platform Scales
To level the scale use the levelling feet and the level indicator. Each foot can
be turned left and right, turning causes tilt.
Adjustment span of the scale level is narrow therefore the correct level is
obtained using steel washers which are to be put under the feet.
5 - nut
6 - washer
7 - centring cone
8 - anchor bolt
