5
1. INTENDED USE
The MW-01-A mass converter is designed to be a component of an industrial
load cell scale. Depending on the needs, communication with the mass
converter can be carried out via the following communication interfaces:
RS232, RS485, Ethernet, Profibus, Profinet, Ethernet IP. The MW-01-A mass
converter is compatible with indicators and PC.
Operation of the MW-01-A mass converter via PC is carried out using
„MwManager”
software.
2. WARRANTY CONDITIONS
A. RADWAG is obliged to repair or exchange all elements that appear to be
faulty by production or by construction.
B. Defining defects of unclear origin and means of their elimination can only
be realized with the assistance of the manufacturer and the user
representatives.
C. RADWAG does not bear any responsibility for damage or losses
resulting from unauthorized or inadequate performing of production
or service processes.
D. The warranty does not cover:
mechanical damage caused by product exploitation other than
intended, damage of thermal and chemical origin, damage caused by
lightning, overvoltage in the power network or other random event,
inappropriate cleaning habits.
E. Loss of warranty takes place if:
a repair is carried out outside RADWAG authorized service point,
service claims intrusion into mechanical or electronic construction by
unauthorized people,
the device does not bear security seal stickers.
F. Warranty conditions outline the warranty period for rechargeable
batteries attached to the device for 12 months.
G. For detailed warranty conditions read the service card.
H. Contact with the central authorized service: +48 (48) 386 63 30.
3. MAINTENANCE
In order to clean the mass converter risk-free, it is necessary to disconnect
the device from the mains.
Avoid using cleansers containing any corrosive chemicals, e.g. bleach (with
chlorine). Do not use cleansers containing abrasive substances. Always
remove the dirt using a microfiber cloth, do it to avoid damage to the protective
coating. In the case of daily maintenance:
