- 18 -
P7.1
BALANCE ID
|
P7.2
SCALE TYPE
|
P7.3
PROG.VER.
|
P7.4
TEMP.
|
P7.5
SETUP PRNT.
|
P8 UNITS
P8.1
ACCESSIBILITY
|
[declaration of units to be available for balance
operation]
P8.2
START UNIT
|
[selection of a start unit, unit active on balance start-
up]
P8.3
USER UNIT U1
|
[parameter defining user’s unit 1]
P8.4
USER UNIT U2
|
[parameter defining user’s unit 2]
P9 IMPORT/EXPORT
(parameter displayed upon inserting the USB flash drive to the balance)
IE1
EKSPORT
|
[data export]
IE2
IMPORT
|
[data import]
CAUTION!
Balance memory modifications will be saved upon abandoning the menu (on return to weighing).
Press ESC button several times.
5.4. LOGGING
In order to have full access to user parameters and be enabled to edit databases, the balance
operator should log in as
<ADMINISTRATOR>
each time running the balance. The software enables
the entry of 100 users with various access rights.
First Log In operation - procedure:
•
Run home screen and press
button, next select <
LOG IN
> option, operators database
window opens with list of available users, or press function button with <
LOG IN
> function
assigned, or press
button, enter users database and select <
ADMIN
> user.
•
Press
button for confirmation, wait to be asked for a password.
•
Enter the password: „1111”, next press
for confirmation.
•
Home screen of the software is displayed again automatically.
•
When logged, add users and set the permissions levels (for the procedure of assigning
permissions levels read section 9.1).
On future Logging In, select a user from the list and enter the password, the software initiates
operation with permissions level set for the selected user.
If any user is logged in, a pictogram
is displayed.
Log out operation – procedure:
•
Select <
NONE
> position out of the list of available users
•
Home screen of the software is displayed again, and the display shows no logged-in user (no
logged-in user, no pictogram
on the display).
Summary of Contents for PS 200/2000 R2
Page 95: ...95...
