- 150 -
18.2.
WIFI port settings
CAUTION:
1. The transmission parameters must be matched to the customer’s
local network.
2. Wi-Fi modules operate using one channel mostly, the one that was
defined during Wi-Fi network configuration.
3. To ensure proper Wi-Fi router cooperation (the router changes
channels automatically, set <AUTOCHANNEL> parameter to
<YES> value while configuring connection.
4. To ensure proper communication with the computer by means of a
Wi-Fi port, using your balance set port parameter for computer to
<WIFI> option: P4.1.1 <URZADZENIA/KOMPUTER/PORT/WIFI>.
Parameters available for Wi-Fi connection settings:
P3.3.1 – STATUS
P3.3.2 – CHOOSE NETWORK
P3.3.3 – NETWORK SETTING
P3.3.3.1 – NAME (the name of the network that has been selected)
P3.3.3.2 – PASSWORD (password – ‘stars’ are displayed)
P3.3.3.3 – CHANNEL NO (default <AUTO>)
P3.3.3.4 – IP (balance ID number, make sure that the number is not
engaged by a different device using this network)
P3.3.3.5 – MASK (default 255.255.000.000)
P3.3.3.6 – GATE (default 10.10.8.244)
P3.3.3.7 – PORT (default 4000)
P3.3.3.8 – MAC ADRES (0008DC…)
P3.3.4 – WIFI STARTUP
After entering the parameter, message <STATUS> and value describing the
connection status for WiFi network appear in the bottom line.
•
CONNECT
– the balance is connected to one of the available Wi-Fi
networks, additionally, at the top
pictogram turns up and
stays visible as long as network connection is active.
•
CONNECTIVITY
– the balance is trying to re-establish connection with the
previously connected network, suitable for previously entered
settings (network, IP, etc.)
•
NONE
– Wi-Fi module is not installed in the balance.
