12
4.3. Positioning
Before switching on the balance, please level the device
with two adjusting feet situated at the back of the casing.
Please level the balance so that the air bubble of the level
is placed centrally.
4.4. Standard accessories
•
Balance.
•
Weighing pan and protecting elements.
•
Power
adapter.
•
User
manual.
4.5. Cleaning
Balance should be cleaned with damp cloth. In order to clean the weighing pan
of the balance, please remove it from the weighing chamber. Cleaning of the
pan when installed may cause damage of the measuring system of the
balance.
4.6. Connection to mains
Balance can be connected to mains only with a power adapter offered as
standard accessory to the balance. Nominal power supply of the power adapter
(specified on the data plate of the power adapter) should be compatible to the
power from mains. Please plug the adapter the socket at the back of the
balance, the display with light on and show sequence of digits – display test),
after which balance will display 0.0000g. if indication is different from zero,
please press
ESC/TARA button
.
4.7. Connection of additional equipment
The balance must be disconnected from the mains before connecting or
disconnecting additional equipment (printer, PC) to or from the data interface.
Use only accessories and peripheral equipment recommended by the
manufacturer with your balance. These have been ideally coordinated to your
balance.
Summary of Contents for PS Series
Page 2: ...2 JUNE 2008...
Page 35: ...35...
Page 48: ...48 if you want to choose one them e g 20pcs press ENTER PRINT and proceed as shown on picture...
Page 58: ...58...
