background image

 

4.3.  ECR Recorder and THB.R Set 

 

In order to run the ECR recorder, connect it to the computer, next connect the THB.R module 
to the recorder.  
On your computer install the 

THB-R-Multi

 software enabling readout of measured quantities 

values, next set communication parameters. In order to do it correctly, follow instructions 
provided in user manual of the balance. 
The ECR cooperates with THB.R (see the figure below). It records air temperature, 
atmospheric pressure and air humidity values read from connected THB.R modules. The 
ECR can record values from 2 THB.R modules simultaneously. 
By standard the set comprises one THB.R module. 
 

 

 
The ECR recorder enables readout of metrological data simultaneously from all the 
connected modules within a specified time interval. The data is saved to the recorder's 
internal memory. 
The recorder is powered by an external 10-20VDC power supply, or USB interface. 
Additionally it features an internal battery. The battery is charged when the ECR recorder is 
connected to a PC using USB port (e.g. during readout of the data from the recorder's 
internal memory), and when operating with use of external power supply. 
RS232 and USB interfaces enable connecting the recorder to a PC with installed 

THB-Multi

 

software, which software allows preview and readout of the parameters saved to the 
recorder. 
 
Set components: 
- ECR recorder, 
- THB.R module - 1 pcs., 
- TH-W2 water temperature sensor, 
- Power supply 12V, 
- USB B cable 
- RS232 cable 

THB-R-Multi

 software, and 

- additional THB.R module, 

on purchase order

Summary of Contents for THB.Y












Reviews: