26.5. Setting the reference mass by entering single piece mass directly
to the database
After selecting a product from the product database a mass of single
piece from the field
<Mass>
is used.
Procedure:
•
While
in
<
Parts counting >
press
,
•
Using
or
choose a product and confirm it by pressing
.
Caution:
The selected product has to have declared unit mass (single piece mass).
26.6. Inscribing the unit mass to the database
The unit mass can be described a unit mass the following way:
a) Estimate the unit mass (see 26.2 and 26.3),
b) Enter the products database
,
c) Keep the finger pressed on the required position then a context
menu is displayed,
d) Choose
option
<Ascribe standard>
, then the standard unit mass
is attributed to the product in the field
<Mass>
.
Caution:
Attributing a standard to a selected product is also possible by
programmable button. Setting programmable buttons is described in ch.
17.2 of this manual The list of functions is described in APPENDIX B
of this manual.
27. WORKING MODES – PERCENT SETUP (DEVIATIONS)
The program allows to check weighments in deviations (in %) around an
outlined standard mass. The standard mass can be outlined by weighing
or entering it by a user.
124
