background image

 

Caution: 

Submenu: “

 Devices / 

 

Printer / 

Printouts / 

Formulation 

report printout template” enables optional modifying of the report  
template (see ch. 16.2.3 of this user manual). 

 
 

Default form of the report template from formula making process: 

 

---------------------------------------------- 
Formulation 
---------------------------------------------- 
{40:Start date:,-25}{240} 
{40:End date:,-25}{241} 
{40:Name:,-25}{220} 
{40:Code:,-25}{221} 
{40:Status:,-25}{242} 
{40:Measurements:,-25} 
---------------------------------------------- 
{245:(50,-20)  (7)(11) 
(40:Nominal Mass:,-25)(246)(11) 
(40:Difference:,-25)(247)(11) 
---------------------------------------------- 

---------------------------------------------- 
{40:Mass:,-25}{244} 
---------------------------------------------- 

 

The report from each completed formula making process is simultaneously 

saved in the database of 

<

Reports From Formulation>

, where the files 

are named by their date and hour of process execution and formulation 
status. List of data for the formula making process – see ch. 35.5.3 of this 
user manual. 

 
 
 

30. WORKING MODE – CPG (CONTROL OF PREPACKED GOODS) 

 

Working mode 

<

 CPG>

 enables carrying out a control of prepacked goods 

(single stand of network) that is supported by database containing list of 
products and operators. A control started from a scale is completed 
automatically after checking an appropriate quantity of packages (samples).  

 

The scale allows for connecting it with a PC computer featuring computer 
software 

E2R SYSTEM 

and thus forming a multiposition (network) system. 

Each scale in the network system is an independent weighing stand, and data 
on the control process is sent to the computer software on the real time basis.  

 

149

Summary of Contents for WLY

















































































































































































































































































































Reviews: