Caution:
The list of functions that can be attributed to keys or buttons is listed
in APPENDIX B of this manual.
17.3. Displaying platforms
If a scale is equipped with two platforms users can switch between platforms
in three ways:
•
By pressing the platform number on the scale screen,
•
By pressing a formerly defined button
<
Change platform>
.
•
By activating in parameters all platforms that will be separately
placed in the main window of the program. In that case platforms
can be activated by pressing the area of this platform.
Caution:
The procedure of attributing functions to buttons is described in ch. 17.2
of this manual.
To activate all platforms press
, choose:
„
Parameters /
Display /
Show all platforms”
, and set appropriately.
- Displaying all platforms disabled
- Displaying all platforms enabled
17.4. Bargraph
A bargraph is a typical visualization procedure. It helps in quick weighing.
It requires less concentration to read if a weighing is between minimum
and maximum thresholds.
17.4.1. Bargraph type
To see the bargraph on the screen enable it in parameters.
Procedure:
•
Enter
submenu
“
Display /
Bargraph”
in accordance with
point 17 of this user manual,
77
