•
Signalling mass above the set value of
Qn+2T
:
Caution:
In case of additional declaring the values for MIN, MAX limits, the “control”
bargraph refers to the MIN, MAX limits and the nominal mass, but without
displaying the errors for T and 2T.
Qn
83
MIN
MAX
18. INPUTS / OUTPUTS
PUE 7.1 weighing indicator are equipped with 4 inputs / 4 outputs. To adjust
software to the users needs configure inputs outputs in the submenu
in the submenu
<
Inputs / Outputs>
:
•
indicator inputs,
•
indicator outputs.
In order to enter submenu
<
Inputs / Outputs>
,
press
and then
:
„
Inputs / Outputs”
.
18.1. Configuration of inputs
Procedure:
•
Enter
<
Inputs / Outputs>
according to ch. 18 of this manual,
•
Choose
<
Inputs>
and enter the selected input you will see
a list of functions to ascribe,
•
Choose the required function from the list and return to weighing
saving the changes according to ch. 12.2 of this manual.
Caution:
The list of functions to ascribe to inputs are described in APPENDIX B
of this manual. By default inputs have no ascribed functions <None>.